通風管道在許多修建物里面都是不可短少的通風資料，假設咱們發現這些通風管道有損害，沒需求當即開端替換，因為有的破損狀況是通風管道加工能夠采納適宜的辦法進行修復的。下面
山東通風管道廠家為您解答。
Ventilation ducts are indispensable ventilation data in many buildings. If we find that these ventilation ducts are damaged, we do not need to replace them immediately, because some damaged conditions can be repaired by adopting appropriate methods during the processing of ventilation ducts. Next, Shandong ventilation pipe manufacturer will answer for you.
假設通風管道外層僅稍稍的破損，可用專用的密封膠帶來修補。假設是表里表有細微破損，可用專用修補膠來修補。假設外外表鋁箔層破損，但玻纖保溫層沒有被損壞，可用一片質量較好的鋁箔片來修補。
Assuming that the outer layer of the ventilation pipe is only slightly damaged, special sealant can be used to repair it. It is assumed that there is slight damage on the inside and outside of the meter, which can be repaired with special repair glue. Assuming that the aluminum foil layer on the outer surface is damaged, but the glass fiber insulation layer is not damaged, a piece of aluminum foil with good quality can be used to repair.
假設通風管道壁的破損已觸及到玻纖保溫層，可將破損處切開下來，開出男女搭接口，再挑塊無缺的板材，依據切開下來的玻板規范切開好，留下男女搭接口，在四周接口上涂上修補膠和粘膠劑，然后做好密封。
Assuming that the damage of the ventilation pipe wall has touched the glass fiber insulation layer, the damaged part can be cut off, the male and female joints can be made, and then the intact plate can be picked up. According to the specifications of the glass plate cut off, the male and female joints can be cut off, and the male and female joints can be left. The repair glue and adhesive can be applied on the surrounding interfaces, and then the sealing can be done.
但是萬一真的損壞非常嚴峻，根柢無法持續運用就要將其報廢了。因為即便暫時康復好了，持續運用功用性會不抱負，還會在往后再次損壞。
But in case of serious damage, it will be scrapped if it cannot be used continuously. Because even if he recovers temporarily, he will not be ambitious if he continues to use the function, and will be damaged again in the future.
在通風管道設備時發現破損已到達玻纖保溫層時，則可將破損的當地切開下來，另選一塊無缺的板材，根據切開下來的玻板標準切開好，然后在周圍接口上涂上修補膠及粘膠劑，根據工藝標準中止密封，在通風設備正常作業時就要常常查看防止耽誤作業。只需正常運轉的通風設備才會為人類效能，這就懇求要及時查看設備能否破損。
When it is found that the damage has reached the glass fiber insulation layer in the ventilation duct equipment, the damaged area can be cut down, another intact plate can be selected, cut according to the cut glass plate standard, and then apply repair glue and adhesive on the surrounding interface. Stop sealing according to the process standard. When the ventilation equipment is operating normally, it is necessary to check frequently to prevent delay in operation. Only the ventilation equipment in normal operation can be effective for human beings, so it is requested to check whether the equipment can be damaged in time.
只有正常運行的通風設備才能為人類服務，這就要求要及時檢查設備是否破損，并且及時更換補救，以保證整個通風進程可以正常工作。
Only normal ventilation equipment can serve human beings, which requires timely inspection of whether the equipment is damaged, and timely replacement and remediation to ensure that the entire ventilation process can work normally.
This is all about how to process and repair damaged ventilation pipes. I hope it will help you! If you have any needs or questions, you can come to our website at any time http://www.euio.com.cn Consult!
上一篇：凈化空調系統通風管道的制作有一定的環境要求
下一篇：通風管道的機械通風標準怎樣？
