通風管道是一種用于空氣流通和降低有害氣體濃度的市政基礎設施，廣泛應用于餐飲、賓館、工農業等行業。在生活中，我們隨處可見通風管道，通風管道的重要性不言而喻。由于通風管道的生產成本較高，管道的維護越來越受到人們的重視
Ventilation duct is a municipal infrastructure for air circulation and reducing the concentration of harmful gases, which is widely used in catering, hotels, industry and agriculture and other industries. In life, we can see ventilation ducts everywhere, and the importance of ventilation ducts is self-evident. Due to the high production cost of ventilation pipes, people pay more and more attention to the maintenance of pipes
冷熱絕緣
Cold and hot insulation
冬季(保溫):防止管道內空氣的熱量流失;
Winter (insulation): prevent the heat loss of the air in the pipeline;
輸送余熱蒸汽或高溫氣體時，熱量會散發到空間中，室內溫度會升高;
When transporting waste heat steam or high-temperature gas, heat will be emitted into the space, and the indoor temperature will rise;
防止接觸風管時燙傷;
Prevent scalding when contacting the air duct;
夏天(保冷):因為運輸天然氣的溫度低于周圍環境的溫度,冷凝可能發生在管道的外壁,這將增加冷卻損失的空調系統的風道,冷凝液滴會污染天花板和墻上,所以要做好冷保溫處理。
Summer (cold insulation): because the temperature of natural gas transported is lower than that of the surrounding environment, condensation may occur on the outer wall of the pipeline, which will increase the cooling loss of the air duct of the air conditioning system, and condensate droplets will pollute the ceiling and wall, so cold insulation treatment should be done well.
另外，風管輸送氣體時，對風管進行除銹，刷防銹漆，對含塵氣體噴涂防損保護層。當環境空氣濕度較大時，風管外壁應進行防腐、防銹處理。只有防腐保溫(冷保溫)才能減少后期使用過程中的腐蝕現象。
In addition, when the air duct is conveying gas, the air duct shall be derusted, painted with antirust paint, and the dusty gas shall be sprayed with a loss prevention protective layer. When the ambient air humidity is high, the outer wall of the air duct should be treated with anti-corrosion and rust prevention. Only anti-corrosion insulation (cold insulation) can reduce the corrosion phenomenon in the later use process.
如何防止腐蝕?
How to prevent corrosion?
俗話說“三層內三層外”，其實這不是開玩笑!
As the saying goes, "three layers inside and three layers outside", in fact, this is not a joke!
噴涂防腐工藝真的需要面漆6次才能達到防腐!
Spraying anti-corrosion process really needs 6 times of finish paint to achieve anti-corrosion!
綜上所述，只有進行防腐、保溫、冷保溫，才能在以后的使用過程中減少腐蝕現象。
To sum up, only by carrying out anti-corrosion, thermal insulation and cold insulation can we reduce corrosion in the later use process.
The above is a detailed introduction about the ventilation ducts in Jinan. I hope it will help you If you have any questions, please contact us We will provide you with professional service http://www.euio.com.cn
上一篇：通風空調系統中常用的通風管道性能
下一篇：怎樣才能讓通風管道發揮出更大的功效？
