鍍鋅風管通風管道怎么進行清洗工作？
How to clean the galvanized air duct and ventilation duct?
1.先用紙巾蓋住通風管道送風裝置（向房間供熱的開口）。
1. Cover the ventilation duct and air supply device (the opening for heating the room) with a paper towel first.
您這樣做是為了防止工作時排出的灰塵飄入房間。只需提起收紙器，將紙巾包裹在紙巾的頂部，然后更換它。
You do this to prevent the dust discharged during work from floating into the room. Just lift the paper receiver, wrap the paper towel on the top of the paper towel, and then replace it.
2.打開風扇，以使灰塵隨著撞擊和刷掃而松動。
2. Turn on the fan to make the dust loose with impact and brushing.
將恒溫器設置為“風扇打開”，并關閉“加熱/冷卻”模式，以便僅風扇在運行。如果您沒有僅使用風扇的選件，則可以進行加熱，也可以借此機會使用此有用的選件安裝更新的恒溫器。
Set the thermostat to "fan on" and turn off "heating / cooling" mode so that only the fan is running. If you do not have a fan only option, you can heat it or take this opportunity to use this useful option to install an updated thermostat.
3.檢查通風管道過濾器，確保舊的爐子過濾器就位，以免敲打下來的灰塵不會被吸入風扇電動機中。
3. Check the ventilation duct filter to ensure that the old furnace filter is in place, so that the dust knocked down will not be sucked into the fan motor.
松開管道中的灰塵。敲除管道中積聚的灰塵。只需握住刷子的手柄，然后開始敲打地下室中任何可用的風管工作。這將有助于解決可能粘附在管道內部的任何潮濕灰塵沉積物。
Loosen the dust in the pipe. Knock out the dust accumulated in the pipe. Just hold the handle of the brush and start tapping any available air duct in the basement. This will help resolve any wet dust deposits that may adhere to the inside of the pipe.
The above is the detailed introduction of Shandong cable tray, which I hope will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.sdhangfeng.com
上一篇：提高排煙管道質量的方法有哪些？
下一篇：哪幾個方面可以危害到通風管道的安裝品質
