一個健康、安全的工作環境，對提高工作效率是至關重要的。尤其是在實驗室，由于各種化學物質的使用，常常造成實驗室的空氣污染。有些物質不但難聞，甚至有害健康。自然，如何選擇一個適當的通風設備成了各個實驗室不可忽略的話題。實驗室如何選擇通風管道和通風柜呢？通風管道廠家為您講解：
A healthy and safe work environment is crucial for improving work efficiency. Especially in laboratories, the use of various chemical substances often causes air pollution. Some substances not only smell bad, but are even harmful to health. Naturally, how to choose an appropriate ventilation device has become a topic that cannot be ignored in various laboratories. How to select ventilation ducts and Fume hood in laboratory? The ventilation duct manufacturer will explain to you:
造成實驗室空氣污染的主要原因就是在各種實驗中散發的氣體、煙霧和灰塵顆粒物。在英國，化學和有害物質的使用，被置于“有害物質使用管理規定”（C。O。S。H。H）的管理之下，COSHH規定，在實驗室，任何可能造成空氣污染的物質的使用都要在實驗室通風柜內進行。有一臺好的通風柜，必能達到事半功倍的效果。那么如何才能選擇到一臺好的通風柜呢？通風柜的好壞單從表面是看不出來的，須從它的內部進行解析：
The main cause of laboratory air pollution is the emission of gases, smoke, and dust particles in various experiments. In the UK, the use of chemicals and hazardous substances is under the management of the "Management Regulations on the Use of Hazardous Substances" (C. O. S. H. H). COSHH stipulates that any substance that may cause air pollution in the laboratory must be used in the laboratory Fume hood. With a good Fume hood, you can get twice the result with half the effort. So how can we choose a good Fume hood? The quality list of Fume hood cannot be seen from the surface, but must be analyzed from its interior:
1、保證通風柜內的氣體、煙霧和灰塵顆粒特不泄露于室內空氣中。
1. Ensure that the gas, smoke and dust particles in the Fume hood will not leak into the indoor air.
2、可燃氣體在通風柜內不聚集。
2. Combustible gas will not gather in the Fume hood.
3、保證實驗室工作人員在通風櫥前工作時，不受有害物質的侵害，萬一玻璃門破裂時不被碎玻璃劃傷。
3. Ensure that laboratory staff are not harmed by harmful substances when working in front of the fume hood, and avoid being scratched by broken glass in case the glass door breaks.
4、所選通風柜有（國家）安全認證，設計符合人體工程學原理。
4. The selected Fume hood has international (national) safety certification, and its design conforms to ergonomic principles.
5、通風柜導流板設計是非常重要的，好的導流板設計能使空氣排放流暢，避免煙氣積存。對于一般性的實驗，通風柜表面網速不少于0。5m/s，而進行一些散發灰塵顆粒物的操作，表面網速則達到0。75m/s。
5. The design of Fume hood deflector is very important. A good deflector design can make the air discharge smooth and avoid smoke accumulation. For general experiments, the surface network speed of Fume hood shall not be less than 0. 5m/s, while performing some operations that emit dust particles, the surface network speed reaches 0. 75m/s.
6、通風柜的水、電、氣路裝置均備，設計靈活，以免給用戶帶來不便和煩惱。
6. The water, electricity and air circuit devices of the Fume hood are all available, and the design is flexible to avoid inconvenience and trouble to users.
This article is dedicated by Jinan Ventilation Pipeline Friendship. For more relevant knowledge, please click on: http://www.euio.com.cn Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned
上一篇：螺旋風管有哪些連接以及彎頭
下一篇：減少鍍鋅風管泄漏的措施有哪些？
