通風管道在日常運作中需要注意的幾個小細節。高氏通風管道工程的通風管道的主要用途如下：榜首、通風體系：送新風和排氣，將不好氣體排出室外，把室外新鮮空氣送至室內。一般而言，通風體系的流量都很大，因此要求運用阻力較小的空氣運送管道，以節省造價和運轉費用——通風管道就更適用。
Several small details need to be paid attention to in the daily operation of ventilation pipes. The main uses of the ventilation pipes in Gaoshi ventilation pipeline project are as follows: first, ventilation system: supply fresh air and exhaust, discharge the bad gas out of the room, and send the outdoor fresh air to the room. Generally speaking, the flow of the ventilation system is very large, so it is required to use the air delivery pipe with small resistance to save the cost and operation cost - the ventilation pipe is the most suitable.
一般情況下運用鍍鋅鐵管，有腐蝕性及特別濕潤的場所運用不銹鋼管。
In general, galvanized iron pipes are used, and stainless steel pipes are used in corrosive and especially humid places.
二、空調體系：通風管道可內貼保溫資料，表面美觀。
2、 Air conditioning system: the ventilation pipe can be pasted with insulation data, and the surface is beautiful.
三、排油煙體系：飯店、酒樓、賓館的廚房均有大量油煙發作，需要排出，選用通風管道是適宜的，強度好，經濟實用。
3、 Oil smoke exhaust system: there are a lot of oil smoke attacks in the kitchen of hotels, restaurants and hotels, which need to be discharged. It is suitable to select ventilation pipes with good intensity, economy and practicality.
四、除塵體系：除塵設備的收集和運送，可運用通風管道。
4、 Dedusting system: collection and transportation of dedusting equipment, ventilation pipe can be used.
五、散裝物料運送：氣力運送體系種，一些較細些松懈的物料顆粒，可運用通風管道運送，造價低、效果好。
5、 Bulk material transportation: pneumatic transportation system, some finer and looser material particles can be transported by ventilation pipe, with low cost and good effect.
嚴格遵守操作要求將的降低通風管道裝置的事故發作。所以在日常的運用中要注意以下的幾點：
Strict compliance with the operation requirements will minimize the occurrence of accidents in the ventilation system. Therefore, we should pay attention to the following points in daily use:
1.運轉操作有必要嚴格執行操作規程，操控工藝目標，杜絕超溫、超壓運轉;
1. It is necessary to strictly implement the operation procedures, control the process objectives, and prevent over temperature and over pressure operation;
2.檢修或局部更換通風管道時，避免錯用或不合理代用而降低管道的極限應力;
2. During maintenance or local replacement of ventilation pipes, avoid misuse or unreasonable substitution to reduce the ultimate stress of pipes;
3.通風管道體系應按規則裝設安全泄壓設備并堅持其活絡好用;
3. The ventilation pipe system shall be equipped with safety pressure relief equipment according to the rules and adhere to its flexible and easy use;
4.通風管道有必要由有資格的規劃單位進行規劃并符合規劃規范的規則;
4. It is necessary for the ventilation pipeline to be planned by a qualified planning unit and conform to the rules of the planning specifications;
5.采納有效辦法避免大氣及介質對通風管道的腐蝕;
5. Adopt effective measures to avoid the corrosion of air and medium to ventilation pipe;
6.通風管道裝置工程投用前應進行役前查看和驗收，管系結構、資料、焊接、熱處理、壓力試驗等關鍵環節有必要
6. Check and acceptance shall be carried out before putting into operation of the ventilation pipeline device project. It is necessary to carry out key links such as pipe system structure, data, welding, heat treatment, pressure test, etc
上一篇：通風管道在施工中避讓原則是什么？
下一篇：濟南通風管道是通風系統重要組成部分
